8000T & RT series tanks
Our track brackets are simple to install. They mount using the 2 – 4.5″ holes in the track frame. We use torpedos (heavy wall tubing) that fit into the holes.
We have a new 600 gallon tank that offers a narrower overall width designed to curve over top of the track.
Lakestate Mfg 600 gallon side mount saddle tank
Lakestate Mfg side tank mount shows how it comes over the tracks demonstrating a narrower overall width.
Lakestate Mfg showing the visibility from the tractor cab with a 600 gallon tank.
8RT with 500 gal tanks
Lakestate Mfg showing visibility from the back corner with a 600 gallon tank side mount.
Lakestate Mfg showing tank clearance
8RT with 500 gal tanks
torpedos (heavy wall pipe) fit into track frame
8RX Series
Our brackets for the 8RX series have 2 configurations. We can do the standard mid-mount front dual brackets set wider for the turn-out of the front tracks or we have a bracket that mounts to both the rear track and the transmission for a narrower travel width.
Front Dual Brackets on 8RX
Track Mount on 8RX
Narrower Travel Width
9RX series
Our brackets attach to the track frame and can be mounted on the front or rear tracks.
9RX
9RX
mounts directly to track frame
mounts directly to track frame
2400 gallons capacity
9000T
Our brackets for the 9000T series tractors use the same design as the 8000T but with a few modifications. The holes in the track frame are lower and different width apart. We stepped the bracket up and turn down our torpedos (heavy wall pipes) to fit the slightly smaller holes.
mounts into holes in track frame
9RT side tanks and 400 gal front tank
9RT 1400 gallons
